Publications 2024
Avramenko, T.; Michel, S.; Kollender, J.; Burda, I.; Hans, U.; Affolter, C. Review on environmentally assisted static and fatigue cracking of Al-Mg-Si-(Cu) alloys. Metals 2024, 14 (6), 621 (21 pp.). https://doi.org/10.3390/met14060621
Deshpande, P.; Wasmer, K.; Imwinkelried, T.; Heuberger, R.; Dreyer, M.; Weisse, B.; Crockett, R.; Pandiyan, V. Classification of progressive wear on a multi-directional pin-on-disc tribometer simulating conditions in human joints-UHMWPE against CoCrMo using acoustic emission and machine learning. Lubricants 2024, 12 (2), 47 (23 pp.). https://doi.org/10.3390/lubricants12020047
Dreyer, M. J.; Kneifel, P.; Hosseini Nasab, S. H.; Weisse, B.; Taylor, W. R. A novel method to accurately recreate in vivo loads and kinematics in computational models of the knee. Comput. Methods Biomech. Biomed. Eng. 2024, 27 (7), 860-866. https://doi.org/10.1080/10255842.2023.2206934
Dreyer, M. J.; Weisse, B.; Contreras Raggio, J. I.; Zboray, R.; Taylor, W. R.; Preiss, S.; Horn, N. The influence of implant design and limb alignment on in vivo wear rates of fixed‐bearing and rotating‐platform knee implant retrievals. J. Orthop. Res. 2024, 42 (4), 777-787. https://doi.org/10.1002/jor.25734
Kosterhon, M.; Müller, A.; Rockenfeller, R.; Aiyangar, A. K.; Gruber, K.; Ringel, F.; Kantelhardt, S. R. Invasiveness of decompression surgery affects modeled lumbar spine kinetics in patients with degenerative spondylolisthesis. Frontiers Bioeng. Biotechnol. 2024, 11, 1281119 (14 pp.). https://doi.org/10.3389/fbioe.2023.1281119
Martinoni, T.; Ott, V.; Carvelli, V.; Terrasi, G. P. Characterization and modelling of tensile damage in unidirectional all-carbon hybrid laminates. In Materials science. Proceedings of the 21st European conference on composite materials, presented at the ECCM21 – 21st European conference on composite materials, Nantes, June 2-5, 2024; Binetruy, C., Jacquemin, F., Eds.; European Society for Composite Materials (ESCM); Ecole Centrale de Nantes: Nantes, 2024; Vol. 2, pp 176-182.
Martinoni, T.; Ott, V.; Carvelli, V.; Terrasi, G. P. Tensile behavior of unidirectional thick-Ply all-carbon hybrid laminates: a systematic experimental and numerical study. Composites C: Open Access 2024, 14, 100462 (11 pp.). https://doi.org/10.1016/j.jcomc.2024.100462
Meneces Fuertes, F. C.; Mazrouei-Sebdani, Z.; Michel, S.; Malfait, W. J. Vibration isolation performance of silica aerogel blankets and boards, fumed silica, polymer aerogel and nanofoams. Constr. Build. Mater. 2024, 440, 137429 (10 pp.). https://doi.org/10.1016/j.conbuildmat.2024.137429
Michel, S.; Murphy, N.; Kinloch, A. J.; Jones, R. On cyclic-fatigue crack growth in carbon-fibre-reinforced epoxy–polymer composites. Polymers 2024, 16 (3), 435 (17 pp.). https://doi.org/10.3390/polym16030435
Raza, S.; Triantafyllidis, Z.; Anton, A.; Dillenburger, B.; Shahverdi, M. Seismic performance of Fe-SMA prestressed segmental bridge columns with 3D printed permanent concrete formwork. Eng. Struct. 2024, 302, 117423 (17 pp.). https://doi.org/10.1016/j.engstruct.2023.117423
Taddei, F.; Struzziero, G.; Michaud, V. Influence of partial curing on residual stresses and process time in additive manufacturing of thick thermosetting composites. In Manufacturing. Proceedings of the 21st European conference on composite materials, presented at the ECCM21 – 21st European conference on composite materials, Nantes, June 2-5, 2024; Binetruy, C., Jacquemin, F., Eds.; European Society for Composite Materials (ESCM); Ecole Centrale de Nantes: Nantes, 2024; Vol. 5, pp 230-237.
Wiesli, M. G.; Huber, M. W.; Weisse, B.; Zboray, R.; Kiderlen, S.; González-Vázquez, A.; Maniura-Weber, K.; Rottmar, M.; Lackington, W. A. Immunomodulation using BMP-7 and IL-10 to enhance the mineralization capacity of bone progenitor cells in a fracture hematoma-like environment. Adv. Healthc. Mater. 2024. https://doi.org/10.1002/adhm.202400077