Publications 2020
Alcalá, J.; Očenášek, J.; Varillas, J.; A. El-Awady, J.; Wheeler, J. M.; Michler, J. Statistics of dislocation avalanches in FCC and BCC metals: dislocation mechanisms and mean swept distances across microsample sizes and temperatures. Sci. Rep. 2020, 10, 19024 (14 pp.). https://doi.org/10.1038/s41598-020-75934-5
Arabi-Hashemi, A.; Maeder, X.; Figi, R.; Schreiner, C.; Griffiths, S.; Leinenbach, C. 3D magnetic patterning in additive manufacturing via site-specific in-situ alloy modification. Appl. Mater. Today 2020, 18, 100512 (9 pp.). https://doi.org/10.1016/j.apmt.2019.100512
Artal, R.; Serrà, A.; Michler, J.; Philippe, L.; Gómez, E. Electrodeposition of mesoporous Ni-rich Ni-Pt films for highly efficient methanol oxidation. Nanomaterials 2020, 10 (8), 1435 (17 pp.). https://doi.org/10.3390/nano10081435
Artal, R.; Philippe, L.; Gómez, E.; Serrà, A. Recycled cyanobacteria ashes for sono-enhanced photo-Fenton wastewater decontamination. J. Clean. Prod. 2020, 267, 121881 (10 pp.). https://doi.org/10.1016/j.jclepro.2020.121881
Ast, J.; Schwiedrzik, J. J.; Rohbeck, N.; Maeder, X.; Michler, J. Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals. Mater. Des. 2020, 193, 108765 (11 pp.). https://doi.org/10.1016/j.matdes.2020.108765
Berger, L.; Jurczyk, J.; Madajska, K.; Edwards, T. E. J.; Szymańska, I.; Hoffmann, P.; Utke, I. High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification. ACS Appl. Electron. Mater. 2020, 2 (7), 1989-1996. https://doi.org/10.1021/acsaelm.0c00282
Bertero, E.; Manzano, C. V.; Bürki, G.; Philippe, L. Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte. Mater. Des. 2020, 190, 108559 (7 pp.). https://doi.org/10.1016/j.matdes.2020.108559
Best, J. P.; Ast, J.; Li, B.; Stolpe, M.; Busch, R.; Yang, F.; Li, X.; Michler, J.; Kruzic, J. J. Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass. Mater. Sci. Eng. A 2020, 770, 138535 (8 pp.). https://doi.org/10.1016/j.msea.2019.138535
Brunner, A. J.; Schwiedrzik, J. J.; Mohanty, G.; Michler, J. Fiber push-in failure in carbon fiber epoxy composites. In 1st virtual European conference on fracture - VECF1, presented at the 1st virtual European conference on fracture, Funchal, Portugal, June 29 - July 1, 2020; Iacoviello, F., Sedmak, A., Marsavina, L., Blackman, B., Ferro, G. A., Shlyannikov, V., Ståhle, P., Zhang, Z., Moreira, P. M. G. P., Božic, Ž., et al., Eds.; Procedia structural integrity; Elsevier: Amsterdam, 2020; Vol. 28, pp 538-545. https://doi.org/10.1016/j.prostr.2020.10.063
Bruns, S.; Petho, L.; Minnert, C.; Michler, J.; Durst, K. Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting. Mater. Des. 2020, 186, 108311 (8 pp.). https://doi.org/10.1016/j.matdes.2019.108311
Buchinger, J.; Löfler, L.; Ast, J.; Wagner, A.; Chen, Z.; Michler, J.; Zhang, Z. L.; Mayrhofer, P. H.; Holec, D.; Bartosik, M. Fracture properties of thin film TiN at elevated temperatures. Mater. Des. 2020, 194, 108885 (10 pp.). https://doi.org/10.1016/j.matdes.2020.108885
Cestaro, R.; Serrà, A.; Philippe, L. Electrodeposited manganese oxides nanostructures as efficient photocatalyst for removal of tetracycline antibiotics pollutant. Presented at the 71st annual ISE meeting, Belgrad, Serbien, August 30 - September 04, 2020.
Chen, M.; Pethö, L.; Sologubenko, A. S.; Ma, H.; Michler, J.; Spolenak, R.; Wheeler, J. M. Achieving micron-scale plasticity and theoretical strength in silicon. Nat. Commun. 2020, 11 (1), 2681 (10 pp.). https://doi.org/10.1038/s41467-020-16384-5
Chen, M.; Best, J. P.; Shorubalko, I.; Michler, J.; Spolenak, R.; Wheeler, J. M. Influence of helium ion irradiation on the structure and strength of diamond. Carbon 2020, 158, 337-345. https://doi.org/10.1016/j.carbon.2019.10.078
Chen, M.; Wehrs, J.; Sologubenko, A. S.; Rabier, J.; Michler, J.; Wheeler, J. M. Size-dependent plasticity and activation parameters of lithographically-produced silicon micropillars. Mater. Des. 2020, 189, 108506 (13 pp.). https://doi.org/10.1016/j.matdes.2020.108506
De Vos, M.; Danine, A.; Adam, L.; Diliberto, S.; Caballero-Calero, O.; Martín-González, M.; Péter, L.; Csík, A.; Kálmán, V.; Philippe, L.; et al. Electrodeposition of Tin selenide from oxalate-based aqueous solution. J. Electrochem. Soc. 2020, 167 (16), 162502 (10 pp.). https://doi.org/10.1149/1945-7111/abcb74
Di Gioacchino, F.; Edwards, T. E. J.; Wells, G. N.; Clegg, W. J. A new mechanism of strain transfer in polycrystals. Sci. Rep. 2020, 10 (1), 10082 (15 pp.). https://doi.org/10.1038/s41598-020-66569-7
González-Castaño, M.; Cancellieri, C.; Maeder, X.; Hack, E.; Schmutz, P. Enhancing the insulating and dielectric properties of barrier anodic Al2O3 on high purity aluminum. Appl. Surf. Sci. 2020, 505, 144522 (12 pp.). https://doi.org/10.1016/j.apsusc.2019.144522
Griffiths, S.; Ghasemi Tabasi, H.; Ivas, T.; Maeder, X.; De Luca, A.; Zweiacker, K.; Wróbel, R.; Jhabvala, J.; Logé, R. E.; Leinenbach, C. Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy. Addit. Manuf. 2020, 36, 101443 (15 pp.). https://doi.org/10.1016/j.addma.2020.101443
Haußmann, L.; Neumeier, S.; Kolb, M.; Ast, J.; Mohanty, G.; Michler, J.; Göken, M. Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests. In Proceedings of the 14th international symposium on superalloys, presented at the Superalloys 2020, Seven Springs Mountain Resort, Pennsylvania, USA, September 12–16, 2021; Tin, S., Hardy, M., Clews, J., Cormier, J., Feng, Q., Marcin, J., O'Brien, C., Suzuki, A., Eds.; The minerals, metals & materials series; Springer: Cham, 2020; pp 273-281. https://doi.org/10.1007/978-3-030-51834-9_26
Kakandar, E.; Barrios, A.; Michler, J.; Maeder, X.; Pierron, O. N.; Castelluccio, G. M. A computational and experimental comparison on the nucleation of fatigue cracks in statistical volume elements. Int. J. Fatigue 2020, 137, 105633 (11 pp.). https://doi.org/10.1016/j.ijfatigue.2020.105633
Kalácska, S.; Ast, J.; Ispánovity, P. D.; Michler, J.; Maeder, X. 3D HR-EBSD characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale. Acta Mater. 2020, 200, 211-222. https://doi.org/10.1016/j.actamat.2020.09.009
Kalácska, S.; Dankházi, Z.; Zilahi, G.; Maeder, X.; Michler, J.; Ispánovity, P. D.; Groma, I. Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD. Mater. Sci. Eng. A 2020, 770, 138499 (10 pp.). https://doi.org/10.1016/j.msea.2019.138499
Landa-Castro, M.; Sebastián, P.; Giannotti, M. I.; Serrà, A.; Gómez, E. Electrodeposition of nanostructured cobalt films from a deep eutectic solvent: influence of the substrate and deposition potential range. Electrochim. Acta 2020, 359, 136928 (12 pp.). https://doi.org/10.1016/j.electacta.2020.136928
Manzano, C. V.; Schwiedrzik, J. J.; Bürki, G.; Pethö, L.; Michler, J.; Philippe, L. A set of empirical equations describing the observed colours of metal-anodic aluminium oxide-Al nanostructures. Beilstein J. Nanotechnol. 2020, 11, 798-806. https://doi.org/10.3762/bjnano.11.64
Marczewski, M.; Miklaszewski, A.; Maeder, X.; Jurczyk, M. Crystal structure evolution, microstructure formation, and properties of mechanically alloyed ultrafine-grained Ti-Zr-Nb alloys at 36 ≤ Ti ≤ 70 (at. %). Materials 2020, 13 (3), 587 (18 pp.). https://doi.org/10.3390/ma13030587
Matter, M. T.; Li, J. H.; Lese, I.; Schreiner, C.; Bernard, L.; Scholder, O.; Hubeli, J.; Keevend, K.; Tsolaki, E.; Bertero, E.; et al. Multiscale analysis of metal oxide nanoparticles in tissue: insights into biodistribution and biotransformation. Adv. Sci. 2020, 7 (15), 2000912 (11 pp.). https://doi.org/10.1002/advs.202000912
Mouhamadali, F.; Equis, S.; Saeidi, F.; Best, J. P.; Cantoni, M.; Hoffmann, P.; Wasmer, K. Nanosecond pulsed laser-processing of CVD diamond. Opt. Lasers Eng. 2020, 126, 105917 (12 pp.). https://doi.org/10.1016/j.optlaseng.2019.105917
Nagy, P.; Rohbeck, N.; Roussely, G.; Sortais, P.; Lábár, J. L.; Gubicza, J.; Michler, J.; Pethö, L. Processing and characterization of a multibeam sputtered nanocrystalline CoCrFeNi high-entropy alloy film. Surf. Coat. Technol. 2020, 386, 125465 (9 pp.). https://doi.org/10.1016/j.surfcoat.2020.125465
Niemelä, J. P.; Rohbeck, N.; Michler, J.; Utke, I. Molecular layer deposited alucone thin films from long-chain organic precursors: from brittle to ductile mechanical characteristics. Dalton Trans. 2020, 49 (31), 10832-10838. https://doi.org/10.1039/D0DT02210A
Philip, A.; Niemelä, J. P.; Tewari, G. C.; Putz, B.; Edwards, T. E. J.; Itoh, M.; Utke, I.; Karppinen, M. Flexible ϵ-Fe2O3-terephthalate thin-film magnets through ALD/MLD. ACS Appl. Mater. Interfaces 2020, 12 (19), 21912-21921. https://doi.org/10.1021/acsami.0c04665
Pip, P.; Donnelly, C.; Döbeli, M.; Gunderson, C.; Heyderman, L. J.; Philippe, L. Electroless deposition of Ni–Fe alloys on scaffolds for 3D nanomagnetism. Small 2020, 16 (44), 2004099 (7 pp.). https://doi.org/10.1002/smll.202004099
Plank, H.; Winkler, R.; Schwalb, C. H.; Hütner, J.; Fowlkes, J. D.; Rack, P. D.; Utke, I.; Huth, M. Focused electron beam-based 3D nanoprinting for scanning probe microscopy: a review. Micromachines 2020, 11 (1), 48 (31 pp.). https://doi.org/10.3390/mi11010048
Polyakov, M. N.; Schoeppner, R. L.; Pethö, L.; Edwards, T. E. J.; Thomas, K.; Könnyű, B.; Maeder, X.; Michler, J. Direct co-deposition of mono-sized nanoparticles during sputtering. Scr. Mater. 2020, 186, 387-391. https://doi.org/10.1016/j.scriptamat.2020.05.032
Priebe, A.; Barnes, J. P.; Edwards, T. E. J.; Huszár, E.; Pethö, L.; Michler, J. Elemental characterization of Al nanoparticles buried under a Cu thin film - TOF-SIMS vs. STEM/EDX. Anal. Chem. 2020, 92 (18), 12518-12527. https://doi.org/10.1021/acs.analchem.0c02361
Priebe, A.; Pethö, L.; Michler, J. Fluorine gas coinjection as a solution for enhancing spatial resolution of time-of-flight secondary ion mass spectrometry and separating mass interference. Anal. Chem. 2020, 92 (2), 2121-2129. https://doi.org/10.1021/acs.analchem.9b04647
Priebe, A.; Xie, T.; Pethö, L.; Michler, J. Potential of gas-assisted time-of-flight secondary ion mass spectrometry for improving the elemental characterization of complex metal-based systems. J. Anal. At. Spectrom. 2020, 35 (12), 2997-3006. https://doi.org/10.1039/D0JA00372G
Priebe, A.; Xie, T.; Bürki, G.; Pethö, L.; Johann, M. The matrix effect in TOF-SIMS analysis of two-element inorganic thin films. J. Anal. At. Spectrom. 2020, 35 (6), 1156 (11 pp.). https://doi.org/10.1039/C9JA00428A
Putz, B.; Wurster, S.; Edwards, T. E. J.; Völker, B.; Milassin, G.; Többens, D. M.; Semprimoschnig, C. O. A.; Cordill, M. J. Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling. Acta Astronaut. 2020, 175, 277-289. https://doi.org/10.1016/j.actaastro.2020.05.032
Puydinger dos Santos, M. V.; Brandão, J.; Dugato, D. A.; Béron, F.; Pirota, K. R.; Utke, I. Annealed cobalt-carbon nanocomposites for room-temperature spintronic applications. ACS Appl. Nano Mater. 2020, 3 (7), 7143-7151. https://doi.org/10.1021/acsanm.0c01497
Ramachandramoorthy, R.; Mieszala, M.; Manzano, C. V.; Maeder, X.; Michler, J.; Philippe, L. Dual-templated electrodeposition and characterization of regular metallic foam based microarchitectures. Appl. Mater. Today 2020, 20, 100667 (10 pp.). https://doi.org/10.1016/j.apmt.2020.100667
Reiser, A.; Koch, L.; Dunn, K. A.; Matsuura, T.; Iwata, F.; Fogel, O.; Kotler, Z.; Zhou, N.; Charipar, K.; Piqué, A.; et al. Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties. Adv. Funct. Mater. 2020, 30 (28), 1910491 (20 pp.). https://doi.org/10.1002/adfm.201910491
Rohbeck, N.; Ramachandramoorthy, R.; Casari, D.; Schürch, P.; Edwards, T. E. J.; Schilinsky, L.; Philippe, L.; Schwiedrzik, J.; Michler, J. Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography. Mater. Des. 2020, 195, 108977 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108977
Ruoho, M.; Niemelä, J. P.; Guerra-Nunez, C.; Tarasiuk, N.; Robertson, G.; Taylor, A. A.; Maeder, X.; Kapusta, C.; Michler, J.; Utke, I. Thin-film engineering of mechanical fragmentation properties of atomic-layer-deposited metal oxides. Nanomaterials 2020, 10 (3), 558 (16 pp.). https://doi.org/10.3390/nano10030558
Sarac, B.; Karazehir, T.; Ivanov, Y. P.; Putz, B.; Greer, A. L.; Sarac, A. S.; Eckert, J. Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms. Nanoscale 2020, 12 (44), 22586-22595. https://doi.org/10.1039/d0nr06372j
Sarac, B.; Ivanov, Y. P.; Karazehir, T.; Putz, B.; Greer, A. L.; Sarac, A. S.; Eckert, J. Metallic glass films with nanostructured periodic density fluctuations supported on Si/SiO2 as an efficient hydrogen sorber. Chem. Eur. J. 2020, 26 (34), 8244-8253. https://doi.org/10.1002/chem.202001596
Sastre, J.; Priebe, A.; Döbeli, M.; Michler, J.; Tiwari, A. N.; Romanyuk, Y. E. Lithium garnet Li7La3Zr2O12 electrolyte for all-solid-state batteries: closing the gap between bulk and thin film Li-ion conductivities. Adv. Mater. Interfaces 2020, 7, 2000425 (11 pp.). https://doi.org/10.1002/admi.202000425
Schoeppner, R. L.; Mohanty, G.; Polyakov, M. N.; Petho, L.; Maeder, X.; Michler, J. An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Mater. Des. 2020, 195, 108907 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108907
Schoeppner, R.; Ferguson, C.; Pethö, L.; Guerra-Nuñez, C.; Taylor, A. A.; Polyakov, M.; Putz, B.; Breguet, J. M.; Utke, I.; Michler, J. Interfacial adhesion of alumina thin films over the full compositional range of ternary fcc alloy films: a combinatorial nanoindentation study. Mater. Des. 2020, 193, 108802 (10 pp.). https://doi.org/10.1016/j.matdes.2020.108802
Schürch, P.; Ramachandramoorthy, R.; Pethö, L.; Michler, J.; Philippe, L. Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays. Appl. Mater. Today 2020, 18, 100472 (8 pp.). https://doi.org/10.1016/j.apmt.2019.100472
Serrà, A.; Artal, R.; García-Amorós, J.; Gómez, E.; Philippe, L. Circular zero-residue process using microalgae for efficient water decontamination, biofuel production, and carbon dioxide fixation. Chem. Eng. J. 2020, 388, 124278 (10 pp.). https://doi.org/10.1016/j.cej.2020.124278
Serrà, A.; Pip, P.; Gómez, E.; Philippe, L. Efficient magnetic hybrid ZnO-based photocatalysts for visible-light-driven removal of toxic cyanobacteria blooms and cyanotoxins. Appl. Catal. B 2020, 268, 118745 (10 pp.). https://doi.org/10.1016/j.apcatb.2020.118745
Serrà, A.; Zhang, Y.; Sepúlveda, B.; Gómez, E.; Nogués, J.; Michler, J.; Philippe, L. Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota: influence of architecture, chemical composition, fixation, and photocatalytic efficiency. Water Res. 2020, 169, 115210 (12 pp.). https://doi.org/10.1016/j.watres.2019.115210
Serrà, A.; Artal, R.; García-Amorós, J.; Sepúlveda, B.; Gómez, E.; Nogués, J.; Philippe, L. Hybrid Ni@ZnO@ZnS-microalgae for circular economy: a smart route to the efficient integration of solar photocatalytic water decontamination and bioethanol production. Adv. Sci. 2020, 7 (3), 1902447 (9 pp.). https://doi.org/10.1002/advs.201902447
Serrà, A.; Artal, R.; García-Amorós, J.; Gómez, E.; Sepúlveda, B.; Nogués, J.; Philippe, L. Hybrid photocatalysts for water decontamination and bioethanol production: circular economy. Presented at the 36th SAOG annual meeting, Fribourg, Switzerland, January 30, 2020.
Serrà, A.; Philippe, L. Simple and scalable fabrication of hairy ZnO@ZnS core@shell Cu cables for continuous sunlight-driven photocatalytic water remediation. Chem. Eng. J. 2020, 401, 126164 (12 pp.). https://doi.org/10.1016/j.cej.2020.126164
Serrà, A.; Artal, R.; Pozo, M.; Garcia-Amorós, J.; Gómez, E. Simple environmentally-friendly reduction of 4-nitrophenol. Catalysts 2020, 10 (4), 458 (12 pp.). https://doi.org/10.3390/catal10040458
Sharma, A.; Kositski, R.; Kovalenko, O.; Mordehai, D.; Rabkin, E. Giant shape- and size-dependent compressive strength of molybdenum nano- and microparticles. Acta Mater. 2020, 198, 72-84. https://doi.org/10.1016/j.actamat.2020.07.054
Speed, A.; Groetsch, A.; Schwiedrzik, J. J.; Wolfram, U. Extrafibrillar matrix yield stress and failure envelopes for mineralised collagen fibril arrays. J. Mech. Behav. Biomed. Mater. 2020, 105, 103563 (14 pp.). https://doi.org/10.1016/j.jmbbm.2019.103563
Tranchant, M.; Serrà, A.; Gunderson, C.; Bertero, E.; García-Amorós, J.; Gómez, E.; Michler, J.; Philippe, L. Efficient and green electrochemical synthesis of 4-aminophenol using porous Au micropillars. Appl. Catal. A 2020, 602, 117698 (8 pp.). https://doi.org/10.1016/j.apcata.2020.117698
Utke, I.; Michler, J.; Winkler, R.; Plank, H. Mechanical properties of 3D nanostructures obtained by focused electron/ion beam-induced deposition: a review. Micromachines 2020, 11 (4), 397 (47 pp.). https://doi.org/10.3390/MI11040397
Wheeler, J. M.; Thilly, L.; Zou, Y.; Morel, A.; Raghavan, R.; Michler, J. The effect of dislocation nature on the size effect in Indium Antimonide above and below the brittle-ductile transition. MRS Adv. 2020, 5 (33-34), 1811-1818. https://doi.org/10.1557/adv.2019.369
Wieczerzak, K.; Michler, J.; Wheeler, J. M.; Lech, S.; Chulist, R.; Gondek, Ł.; Czub, J.; Hoser, A.; Schell, N.; Bała, P. An in situ and ex situ study of χ phase formation in a hypoeutectic Fe-based hardfacing alloy. Mater. Des. 2020, 188, 108438 (14 pp.). https://doi.org/10.1016/j.matdes.2019.108438
Wątroba, M.; Bednarczyk, W.; Kawałko, J.; Lech, S.; Wieczerzak, K.; Langdon, T. G.; Bała, P. A novel high-strength Zn-3Ag-0.5Mg alloy processed by hot extrusion, cold rolling, or high-pressure torsion. Metall. Mater. Trans. A 2020, 51 (7), 3335-3348. https://doi.org/10.1007/s11661-020-05797-y
Xiao, Y.; Besharatloo, H.; Gan, B.; Maeder, X.; Spolenak, R.; Wheeler, J. M. Combinatorial investigation of Al-Cu intermetallics using small-scale mechanical testing. J. Alloys Compd. 2020, 822, 153536 (11 pp.). https://doi.org/10.1016/j.jallcom.2019.153536
Xie, T.; Edwards, T. E. J.; della Ventura, N. M.; Casari, D.; Huszár, E.; Fu, L.; Zhou, L.; Maeder, X.; Schwiedrzik, J. J.; Utke, I.; et al. Synthesis of model Al-Al2O3 multilayer systems with monolayer oxide thickness control by circumventing native oxidation. Thin Solid Films 2020, 711, 138287 (8 pp.). https://doi.org/10.1016/j.tsf.2020.138287
Yaqoob, A. A.; Noor, N. H. binti M.; Serrà, A.; Ibrahim, M. N. M. Advances and challenges in developing efficient graphene oxide-based ZnO photocatalysts for dye photo-oxidation. Nanomaterials 2020, 10 (5), 932 (26 pp.). https://doi.org/10.3390/nano10050932
Zamprogno, P.; Thoma, G.; Cencen, V.; Ferrari, D.; Putz, B.; Michler, J.; Fantner, G. E.; Guenat, O. T. Soft stretchable biological membranes for organs-on-chip. In 24th international conference on miniaturized systems for chemistry and life sciences (MicroTAS 2020), presented at the MicroTAS 2020. The 24th international conference on miniaturized systems for chemistry and life sciences, virtual, online, October 4-9, 2020; Chemical and Biological Microsystems Society (CBMS), 2020; pp 979-980.
Zimmerman, J.; Sharma, A.; Divinski, S. V.; Rabkin, E. Relative grain boundary energies in ultrafine grain Ni obtained by high pressure torsion. Scr. Mater. 2020, 182, 90-93. https://doi.org/10.1016/j.scriptamat.2020.03.008
Publications 2019
Al-Alam, P.; Pernot, G.; Isaiev, M.; Lacroix, D.; De Vos, M.; Stein, N.; Osenberg, D.; Philippe, L. Lattice thermal conductivity of Bi2Te3 and SnSe using Debye-Callaway and Monte Carlo phonon transport modeling: application to nanofilms and nanowires. Phys. Rev. B 2019, 100 (11), 115304 (16 pp.). https://doi.org/10.1103/PhysRevB.100.115304
Ast, J.; Ghidelli, M.; Durst, K.; Göken, M.; Sebastiani, M.; Korsunsky, A. M. A review of experimental approaches to fracture toughness evaluation at the micro-scale. Mater. Des. 2019, 173, 107762 (24 pp.). https://doi.org/10.1016/j.matdes.2019.107762
Ast, J.; Balogh-Michels, Z.; Döbeli, M.; Dommann, A.; Gindrat, M.; Maeder, X.; Neels, A.; Polyakov, M. N.; Rudigier, H.; Widrig, B.; et al. The formation of a homogeneous α-alumina coating on a Ni-based superalloy from a layer stack deposited by cathodic arc evaporation. Surf. Coat. Technol. 2019, 360, 329-334. https://doi.org/10.1016/j.surfcoat.2018.12.089
Bertero, E.; Manzano, C. V.; Pellicer, E.; Sort, J.; Ulfig, R. M.; Mischler, S.; Michler, J.; Philippe, L. 'Green' Cr(III)–glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure. RSC Adv. 2019, 9 (44), 25762-25775. https://doi.org/10.1039/C9RA04262H
Best, J. P.; Wehrs, J.; Polyakov, M.; Morstein, M.; Michler, J. High temperature fracture toughness of ceramic coatings evaluated using micro-pillar splitting. Scr. Mater. 2019, 162, 190-194. https://doi.org/10.1016/j.scriptamat.2018.11.013
Best, J. P.; Maeder, X.; Michler, J.; Spierings, A. B. Mechanical anisotropy investigated in the complex SLM-processed Sc- and Zr-modified Al–Mg alloy microstructure. Adv. Eng. Mater. 2019, 21 (3), 1801113 (6 pp.). https://doi.org/10.1002/adem.201801113
Casari, D.; Pethö, L.; Schürch, P.; Maeder, X.; Philippe, L.; Michler, J.; Zysset, P.; Schwiedrzik, J. A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry. J. Mater. Res. 2019, 34 (14), 2517-2534. https://doi.org/10.1557/jmr.2019.183
Casari, D.; Michler, J.; Zysset, P.; Schwiedrzik, J. Exploring bone's basic building blocks microtensile properties and toughening mechanisms on the lamellar level. Presented at the Nanomechanical testing in materials research and development VII, Malaga, Spain, September 29 - October 4, 2019.
Chawla, V.; Ruoho, M.; Weber, M.; Chaaya, A. A.; Taylor, A. A.; Charmette, C.; Miele, P.; Bechelany, M.; Michler, J.; Utke, I. Fracture mechanics and oxygen gas barrier properties of Al2O3/ZnO nanolaminates on PET deposited by atomic layer deposition. Nanomaterials 2019, 9 (1), 88 (17 pp.). https://doi.org/10.3390/nano9010088
Chen, L.; Edwards, T. E. J.; Di Gioacchino, F.; Clegg, W. J.; Dunne, F. P. E.; Pham, M. S. Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression. Int. J. Plast. 2019, 119, 344-360. https://doi.org/10.1016/j.ijplas.2019.04.012
Conte, M.; Mohanty, G.; Schwiedrzik, J. J.; Wheeler, J. M.; Bellaton, B.; Michler, J.; Randall, N. X. Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C. Rev. Sci. Instrum. 2019, 90 (4), 045105 (12 pp.). https://doi.org/10.1063/1.5029873
Csanádi, T.; Wehrs, J.; Grasso, S.; Reece, M.; Michler, J.; Dusza, J. Anomalous slip of ZrB2 ceramic grains during in-situ micropillar compression up to 500 °C. Int. J. Refract. Met. Hard Mater. 2019, 80, 270-276. https://doi.org/10.1016/j.ijrmhm.2019.01.021
Edwards, T. E. J.; Di Gioacchino, F.; Clegg, W. J. An experimental study of the polycrystalline plasticity of lamellar titanium aluminide. Int. J. Plast. 2019, 118, 291-319. https://doi.org/10.1016/j.ijplas.2019.02.013
Edwards, T. E. J.; Di Gioacchino, F.; Goodfellow, A. J.; Mohanty, G.; Wehrs, J.; Michler, J.; Clegg, W. J. Deformation of lamellar γ-TiAl below the general yield stress. Acta Mater. 2019, 163, 122-139. https://doi.org/10.1016/j.actamat.2018.09.061
Edwards, T. E. J.; Di Gioacchino, F.; Goodfellow, A. J.; Clegg, W. J. Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging. Int. J. Fatigue 2019, 124, 520-527. https://doi.org/10.1016/j.ijfatigue.2019.03.016
Edwards, T. E. J.; Di Gioacchino, F.; Goodfellow, A. J.; Mohanty, G.; Wehrs, J.; Michler, J.; Clegg, W. J. Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression. Acta Mater. 2019, 166, 85-99. https://doi.org/10.1016/j.actamat.2018.11.050
Fairbrother, D. H.; Rosenberg, S. G.; Hagen, C. W.; Utke, I.; Swiderek, P. Focused electron beam induced processing. In Low-energy electrons. Fundamentals and applications; Ingólfsson, O., Ed.; Taylor & Francis: Singapore, 2019; pp 219-284.
Groetsch, A.; Gourrier, A.; Schwiedrzik, J.; Sztucki, M.; Beck, R. J.; Shephard, J. D.; Michler, J.; Zysset, P. K.; Wolfram, U. Compressive behaviour of uniaxially aligned individual mineralised collagen fibres at the micro- and nanoscale. Acta Biomater. 2019, 89, 313-329. https://doi.org/10.1016/j.actbio.2019.02.053
Guillonneau, G.; Wheeler, J. M.; Wehrs, J.; Philippe, L.; Baral, P.; Höppel, H. W.; Göken, M.; Michler, J. Determination of the true projected contact area by in situ indentation testing. J. Mater. Res. 2019, 34 (16), 2859-2868. https://doi.org/10.1557/jmr.2019.236
Gómez, E.; Serrà, A.; Zhang, Y.; Sepúlveda, B.; Nogués, J.; Michler, J.; Philippe, L. Biomimetic ZnO@ZnS micro/nanostructures for pollutant remediation. Presented at the 25th Topical Meeting of the International Society of Electrochemistry - New electrochemical processes for energy and the environment, Toledo, Spain, May 12-15, 2019.
Gómez, E.; Serrà, A.; Zhang, Y.; Sepúlveda, B.; Nogués, J.; Michler, J.; Philippe, L. Role of the architecture and fixation of ZnO-based sunlight photocatalyts on their ecotoxicological effects on microalgae. Presented at the 2019 - XL Meeting of the Specialized Group of Electrochemistry of the Royal Spanish Society of Chemistry and XX Iberian Meeting of Electrochemistry, Huelva, Spain, July 9-12, 2019.
Iyer, A. H. S.; Mohanty, G.; Stiller, K.; Michler, J.; Colliander, M. H. Microscale fracture of chromia scales. Materialia 2019, 8, 100465 (9 pp.). https://doi.org/10.1016/j.mtla.2019.100465
Jun, T. S.; Maeder, X.; Bhowmik, A.; Guillonneau, G.; Michler, J.; Giuliani, F.; Britton, T. B. The role of β-titanium ligaments in the deformation of dual phase titanium alloys. Mater. Sci. Eng. A 2019, 746, 394-405. https://doi.org/10.1016/j.msea.2019.01.032
Jurczyk, J.; Brewer, C. R.; Hawkins, O. M.; Polyakov, M. N.; Kapusta, C.; McElwee-White, L.; Utke, I. Focused electron beam-induced deposition and post-growth purification using the heteroleptic Ru complex (η3-C3H5)Ru(CO)3Br. ACS Appl. Mater. Interfaces 2019, 11 (31), 28164-28171. https://doi.org/10.1021/acsami.9b07634
Kabel, J.; Parkison, D.; Edwards, T.; Michler, J.; Hosemann, P. Micro-mechanical testing of ceramic matrix composites, extraction of interface properties and impact on composite optimization. Presented at the ECI Nanomechanical testing in materials research and development VII, Malaga, Spain, September 29 - October 4, 2019.
Kacher, J.; Kirchlechner, C.; Michler, J.; Polatidis, E.; Schwaiger, R.; Van Swygenhoven, H.; Taheri, M.; Legros, M. Impact of in situ nanomechanics on physical metallurgy. MRS Bull. 2019, 44 (06), 465-470. https://doi.org/10.1557/mrs.2019.124
Kakandar, E.; Castelluccio, G. M.; Barrios, A.; Pierron, O.; Maeder, X. Computational and experimental study of crack initiation in statistical volume elements. In ICMFF12 - 12th international conference on multiaxial fatigue and fracture, presented at the ICMFF12, Bordeaux, France, June 24-26, 2019; Palin-Luc, T., Morel, F. , Carpinteri, A., Eds.; MATEC Web of Conferences; EDP Sciences: Les Ulis Cedex A, 2019; Vol. 300, p 10001 (8 pp.). https://doi.org/10.1051/matecconf/201930010001
Kochetkova, T.; Michler, J.; Siebenrock, K.; Zysset, P.; Schwiedrzik, J. Combining bone proteotype and multiscale extracellular matrix properties for improved clinical fracture risk prediction. Presented at the Summer school: shaping the future of (bio)medicine (SFM2019), Bellinzona, Schweiz, Mai 12-17, 2019.
Kochetkova, T.; Braun, O.; Overbeck, J.; Peruzzi, C.; Maurya, A.; Michler, J.; Calame, M.; Neels, A.; Zysset, P.; Schwiedrzik, J. Polarized Raman spectroscopy as a method for quantitative analysis of bone fibril orientation. Presented at the Annual Meeting 2019, Swiss Society for Biomedical Engineering (SSBE), Geneva, Switzerland, August 27, 2019.
Kochetkova, T.; Braun, O.; Overbeck, J.; Peruzzi, C.; Maurya, A.; Michler, J.; Calame, M.; Neels, A.; Zysset, P.; Schwiedrzik, J. Polarized raman spectroscopy as a method for quantitative analysis of bone fibril orientation. Presented at the Empa PhD students' symposium, St. Gallen, Switzerland, November 28, 2019.
Liao, Z.; Polyakov, M.; Gavalda Diaz, O.; Axinte, D.; Mohanty, G.; Maeder, X.; Michler, J.; Hardy, M. Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case. Acta Mater. 2019, 180, 2-14. https://doi.org/10.1016/j.actamat.2019.08.059
Manzano, C. V.; Schürch, P.; Pethö, L.; Bürki, G.; Michler, J.; Philippe, L. High aspect-ratio nanocrystalline CuNi T-structures and micro-gears: synthesis, numerical modeling and characterization. J. Electrochem. Soc. 2019, 166 (10), E310-E316. https://doi.org/10.1149/2.0961910jes
Manzano, C. V.; Polyakov, M. N.; Maiz, J.; Aguirre, M. H.; Maeder, X.; Martín-González, M. Pulsed current-voltage electrodeposition of stoichiometric Bi2Te3 nanowires and their crystallographic characterization by transmission electron backscatter diffraction. Sci. Technol. Adv. Mater. 2019, 20 (1), 1022-1030. https://doi.org/10.1080/14686996.2019.1671778
Neuber, N.; Gross, O.; Eisenbart, M.; Heiss, A.; Klotz, U. E.; Best, J. P.; Polyakov, M. N.; Michler, J.; Busch, R.; Gallino, I. The role of Ga addition on the thermodynamics, kinetics, and tarnishing properties of the Au-Ag-Pd-Cu-Si bulk metallic glass forming system. Acta Mater. 2019, 165, 315-326. https://doi.org/10.1016/j.actamat.2018.11.052
Niemelä, J. P.; Macco, B.; Barraud, L.; Descoeudres, A.; Badel, N.; Despeisse, M.; Christmann, G.; Nicolay, S.; Ballif, C.; Kessels, W. M. M.; et al. Rear-emitter silicon heterojunction solar cells with atomic layer deposited ZnO:Al serving as an alternative transparent conducting oxide to In2O3:Sn. Sol. Energy Mater. Sol. Cells 2019, 200, 109953 ( 5 pp.). https://doi.org/10.1016/j.solmat.2019.109953
Peruzzi, C.; Michler, J.; Mazza, E.; Schwiedrzik, J. Dynamic compressive strength of hydrated lamellar bone at the microscale. Presented at the Empa PhD students' symposium, St. Gallen, Switzerland, November 28, 2019.
Peruzzi, C.; Michler, J.; Mazza, E.; Schwiedrzik, J. Dynamic compressive strength of hydrated lamellar bone at the microscale. Presented at the MRS Fall meeting conference location, Boston, USA, December 1-6, 2019.
Petho, L.; Chen, M.; Lauener, C. M.; Michler, J.; Wheeler, J. M. In-situ mechanical testing of microfabricated micro/nanopillars. Presented at the 20th CMi annual review meeting, Lausanne, Switzerland, May 7, 2019.
Pethö, L.; Ramachandramoorthy, R.; Schwiedrzik, J.; Mohanty, G.; Michler, J. High strain rate in situ testing of silicon micropillars. Presented at the 20th CMi annual review meeting, Lausanne, Switzerland, July 15-20, 2018.
Pethö, L.; Casari, D.; Schürch, P.; Maeder, X.; Philippe, L.; Michler, J.; Zysset, P.; Schwiedrzik, J. Microtensile testing of brittle materials using custom fabricated self-aligning silicon grippers. Presented at the 20th CMi annual review meeting, Lausanne, Switzerland, May 7, 2019.
Pillatsch, L.; Östlund, F.; Michler, J. FIBSIMS: a review of secondary ion mass spectrometry for analytical dual beam focussed ion beam instruments. Prog. Cryst. Growth Charact. Mater. 2019, 65, 1-19. https://doi.org/10.1016/j.pcrysgrow.2018.10.001
Pip, P.; Donnelly, C.; Heyderman, L.; Philippe, L. 3D magnetic nanostructures. Fabrication, characterisation, application. Presented at the Empa PhD students' symposium, St. Gallen, Switzerland, November 28, 2019.
Pip, P.; Skjærvø, S.; Manzano, C. V.; Weber, A.; Kohlbrecher, J.; Heyderman, L.; Philippe, L. Triangular ising-like nanowire lattice with out-of-plane magnetization: validation of the predicted phase diagram. Presented at the Workshop on frontiers in artificial spin ice, Bad Zurzach, Switzerland, February 6-8, 2019.
Polyakov, M. N.; Morstein, M.; Maeder, X.; Nelis, T.; Lundin, D.; Wehrs, J.; Best, J. P.; Edwards, T. E. J.; Döbeli, M.; Michler, J. Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering. Surf. Coat. Technol. 2019, 368, 88-96. https://doi.org/10.1016/j.surfcoat.2019.04.042
Priebe, A.; Barnes, J. P.; Edwards, T. E. J.; Pethö, L.; Balogh, I.; Michler, J. 3D imaging of nanoparticles in an inorganic matrix using TOF-SIMS validated with STEM and EDX. Anal. Chem. 2019, 91 (18), 11834-11839. https://doi.org/10.1021/acs.analchem.9b02545
Priebe, A.; Utke, I.; Pethö, L.; Michler, J. Application of a gas-injection system during the FIB-TOF-SIMS analysis — Influence of water vapor and fluorine gas on secondary ion signals and sputtering rates. Anal. Chem. 2019, 91 (18), 11712-11722. https://doi.org/10.1021/acs.analchem.9b02287
Priebe, A.; Michler, J. Application of a novel compact Cs evaporator prototype for enhancing negative ion yields during FIB-TOF-SIMS analysis in high vacuum. Ultramicroscopy 2019, 196, 10-17. https://doi.org/10.1016/j.ultramic.2018.09.008
Priebe, A.; Utke, I.; Pethö, L.; Michler, J. Simultaneous gas co-injection during a FIB-TOF-SIMS measurement as a solution for enhancing spatial resolution and de-coupling mass interference. Presented at the 22nd International conference on secondary ion mass spectrometry – SIMS-22, Kyoto, Japan, October 20-25, 2019.
Putz, B.; Edwards, T.; Huszar, E.; Pethö, L.; Kreiml, P.; Cordill, M.; Thiaudiere, D.; Faurie, D.; Renault, P. O.; Michler, J. In situ fragmentation analysis of ALD-PVD multilayers on flexible substrates. Presented at the ECI Nanomechanical testing in materials research and development VII, Malaga, Spain, September 29 - October 4, 2019.
Ramachandramoorthy, R.; Schwiedrzik, J.; Petho, L.; Guerra-Nuñez, C.; Frey, D.; Breguet, J. M.; Michler, J. Dynamic plasticity and failure of microscale glass: rate-dependent ductile–brittle–ductile transition. Nano Lett. 2019, 19 (4), 2350-2359. https://doi.org/10.1021/acs.nanolett.8b05024
Sastre, J.; Lin, T. Y.; Filippin, A. N.; Priebe, A.; Avancini, E.; Michler, J.; Tiwari, A. N.; Romanyuk, Y. E.; Buecheler, S. Aluminum-assisted densification of cosputtered lithium garnet electrolyte films for solid-state batteries. ACS Appl. Energy Mater. 2019, 2 (12), 8511-8524. https://doi.org/10.1021/acsaem.9b01387
Serrà, A.; Gómez, E.; Philippe, L. Bioinspired ZnO-based solar photocatalysts for the efficient decontamination of persistent organic pollutants and hexavalent chromium in wastewater. Catalysts 2019, 9 (12), 974 (16 pp.). https://doi.org/10.3390/catal9120974
Serrà, A.; Zhang, Y.; Sepúlveda, B.; Gómez, E.; Nogués, J.; Michler, J.; Philippe, L. Highly active ZnO-based biomimetic fern-like microleaves for photocatalytic water decontamination using sunlight. Appl. Catal. B 2019, 248, 129-146. https://doi.org/10.1016/j.apcatb.2019.02.017
Shi, Y.; Fluri, A.; Garbayo, I.; Schwiedrzik, J. J.; Michler, J.; Pergolesi, D.; Lippert, T.; Rupp, J. L. M. Zigzag or spiral-shaped nanostructures improve mechanical stability in yttria-stabilized zirconia membranes for micro-energy conversion devices. Nano Energy 2019, 59, 674-682. https://doi.org/10.1016/j.nanoen.2019.03.017
Spiesz, E. M.; Schmieden, D. T.; Grande, A. M.; Liang, K.; Schwiedrzik, J.; Natalio, F.; Michler, J.; Garcia, S. J.; Aubin-Tam, M. E.; Meyer, A. S. Bacterially produced, nacre-inspired composite materials. Small 2019, 15 (22), 1805312 (6 pp.). https://doi.org/10.1002/smll.201805312
Thoma, G.; Zamprogno, P. G. V.; Ferrari, D.; Putz, B.; Michler, J.; Guenat, O. T. Lung-alveoli-on-chip: mechanical characterization of a new biological membrane. Presented at the Day of biomedical research, Bern, Switzerland, November 13, 2019.
Thomas, K.; Mohanty, G.; Wehrs, J.; Taylor, A. A.; Pathak, S.; Casari, D.; Schwiedrzik, J.; Mara, N.; Spolenak, R.; Michler, J. Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. J. Mater. Sci. 2019, 54 (15), 10884-10901. https://doi.org/10.1007/s10853-019-03422-x
Wang, S.; Kalácska, S.; Maeder, X.; Michler, J.; Giuliani, F.; Britton, T. B. The effect of δ-hydride on the micromechanical deformation of a Zr alloy studied by in situ high angular resolution electron backscatter diffraction. Scr. Mater. 2019, 173, 101-105. https://doi.org/10.1016/j.scriptamat.2019.08.006
Wieczerzak, K.; Bała, P. Hypoeutectic Fe-Cr-Ni-Mo-C alloys additionally strengthened by the Frank-Kasper phases – design by means of the CALPHAD approach. Calphad 2019, 64, 248-257. https://doi.org/10.1016/j.calphad.2018.12.011
Wieczerzak, K.; Pajor, K.; Górecki, K.; Chulist, R.; Bała, P. Microstructural response on nickel addition in rapidly solidified ~Fe-25Cr-xNi-5Mo-0.8C [x = 0, 6, 11, 15, 21 wt. %] hardfacing alloys. J. Alloys Compd. 2019, 787, 186-195. https://doi.org/10.1016/j.jallcom.2019.02.110
Xiao, Y.; Maier-Kiener, V.; Michler, J.; Spolenak, R.; Wheeler, J. M. Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: insights from strain rate jump tests. Mater. Des. 2019, 181, 107914 (12 pp.). https://doi.org/10.1016/j.matdes.2019.107914
Xiao, Y.; Zou, Y.; Ma, H.; Sologubenko, A. S.; Maeder, X.; Spolenak, R.; Wheeler, J. M. Nanostructured NbMoTaW high entropy alloy thin films: high strength and enhanced fracture toughness. Scr. Mater. 2019, 168, 51-55. https://doi.org/10.1016/j.scriptamat.2019.04.011
Publications 2018
Abdolvand, H.; Sedaghat, O.; Guo, Y. Nucleation and growth of {11̄22} twins in titanium: elastic energy and stress fields at the vicinity of twins. Materialia 2018, 2, 58-62. https://doi.org/10.1016/j.mtla.2018.06.012
Antonin, O.; Schoeppner, R.; Gabureac, M.; Pethö, L.; Michler, J.; Raynaud, P.; Nelis, T. Nano crystalline diamond microwave chemical vapor deposition growth on three dimension structured silicon substrates at low temperature. Diam. Relat. Mater. 2018, 83, 67-74. https://doi.org/10.1016/j.diamond.2018.01.007
Arabi-Hashemi, A.; Guo, Y.; Michler, J.; Casari, D.; Leinenbach, C.; Maeder, X. Stress induced martensite variants revealed by in situ high resolution electron backscatter diffraction (HR-EBSD). Mater. Des. 2018, 151, 83-88. https://doi.org/10.1016/j.matdes.2018.04.006
Ast, J.; N. Polyakov, M. N.; Mohanty, G.; Michler, J.; Maeder, X. Interplay of stresses, plasticity at crack tips and small sample dimensions revealed by in-situ microcantilever tests in tungsten. Mater. Sci. Eng. A 2018, 710, 400-412. https://doi.org/10.1016/j.msea.2017.10.096
Ast, J.; Schwiedrzik, J.; Pethö, L.; Maeder, X.; Michler, J. Investigation of the microscale fracture behaviour of GaAs single crystals for mode I, II and III loading. Presented at the Gordon research conference on thin film and small scale mechanical behavior, Lewiston, USA, July 15-20, 2018.
Ast, J.; Schwiedrzik, J. J.; Wehrs, J.; Frey, D.; Polyakov, M. N.; Michler, J.; Maeder, X. The brittle-ductile transition of tungsten single crystals at the micro-scale. Mater. Des. 2018, 152, 168-180. https://doi.org/10.1016/j.matdes.2018.04.009
Ast, J.; Kalácska, S.; Schwiedrzik, J.; Polyakov, M.; Michler, J.; Maeder, X. The use of (3D) HR-EBSD to investigate the brittle to ductile transition in single crystal tungsten. Presented at the Gordon research conference on thin film and small scale mechanical behavior, Lewiston, USA, July 15-20, 2018.
Avancini, E.; Keller, D.; Carron, R.; Arroyo-Rojas Dasilva, Y.; Erni, R.; Priebe, A.; Di Napoli, S.; Carrisi, M.; Sozzi, G.; Menozzi, R.; et al. Voids and compositional inhomogeneities in Cu(In,Ga)Se2 thin films: evolution during growth and impact on solar cell performance. Sci. Technol. Adv. Mater. 2018, 19 (1), 871-882. https://doi.org/10.1080/14686996.2018.1536679
Berger, L.; Madajska, K.; Szymanska, I. B.; Höflich, K.; Polyakov, M. N.; Jurczyk, J.; Guerra-Nuñez, C.; Utke, I. Gas-assisted silver deposition with a focused electron beam. Beilstein J. Nanotechnol. 2018, 9 (1), 224-232. https://doi.org/10.3762/bjnano.9.24
Bertero, E.; Hasegawa, M.; Staubli, S.; Pellicer, E.; Herrmann, I. K.; Sort, J.; Michler, J.; Philippe, L. Electrodeposition of amorphous Fe-Cr-Ni stainless steel alloy with high corrosion resistance, low cytotoxicity and soft magnetic properties. Surf. Coat. Technol. 2018, 349, 745-751. https://doi.org/10.1016/j.surfcoat.2018.06.003
Best, J. P.; Guillonneau, G.; Grop, S.; Taylor, A. A.; Frey, D.; Longchamp, Q.; Schär, T.; Morstein, M.; Breguet, J. M.; Michler, J. High temperature impact testing of a thin hard coating using a novel high-frequency in situ micromechanical device. Surf. Coat. Technol. 2018, 333, 178-186. https://doi.org/10.1016/j.surfcoat.2017.10.072
Best, J. P.; Polyakov, M.; Shinde, D.; Hörnqvist Colliander, M.; Wehrs, J.; Michler, J.; Morstein, M. Ni nanocluster composites for enhanced impact resistance of multilayered arc-PVD ceramic coatings. Surf. Coat. Technol. 2018, 354, 360-368. https://doi.org/10.1016/j.surfcoat.2018.07.102
Cadot, G. B. J.; Thomas, K.; Best, J. P.; Taylor, A. A.; Michler, J.; Axinte, D. A.; Billingham, J. Investigation of the microstructure change due to phase transition in nanosecond pulsed laser processing of diamond. Carbon 2018, 127, 349-365. https://doi.org/10.1016/j.carbon.2017.10.030
Casari, D.; Pethö, L.; Schürch, P.; Philippe, L.; Michler, J.; Zysset, P.; Schwiedrzik, J. Design and validation of a testing setup to measure tensile properties of materials at the microscale. Presented at the 2nd EuFN workshop 2018, Grenoble, France, June 19-20, 2018.
Casari, D.; Pethö, L.; Schürch, P.; Brönnimann, R.; Philippe, L.; Michler, J.; Zysset, P.; Schwiedrzik, J. Tensile properties of bone extracellular matrix at the microscale. Presented at the WCB 2018: 8th world congress of biomechanics, Dublin, Ireland, July 8-12, 2018.
Desmond, P.; Best, J. P.; Morgenroth, E.; Derlon, N. Linking composition of extracellular polymeric substances (EPS) to the physical structure and hydraulic resistance of membrane biofilms. Water Res. 2018, 132, 211-221. https://doi.org/10.1016/j.watres.2017.12.058
Drost, M.; Tu, F.; Berger, L.; Preischl, C.; Zhou, W.; Gliemann, H.; Wöll, C.; Marbach, H. Surface-anchored metal–organic frameworks as versatile resists for gas-assisted e-beam lithography: fabrication of sub-10 nanometer structures. ACS Nano 2018, 12 (4), 3825-3835. https://doi.org/10.1021/acsnano.8b01071
Edwards, T. E. J.; Di Gioacchino, F.; Mohanty, G.; Wehrs, J.; Michler, J.; Clegg, W. J. Analysis of longitudinal twinning in y-TiAl by microcompression up to 700 °C with strain and crystal orientation mapping. Presented at the Gordon research conference on thin film and small scale mechanical behavior, Lewiston, USA, July 15-20, 2018.
Edwards, T. E. J.; Di Gioacchino, F.; Goodfellow, A. J.; Mohanty, G.; Wehrs, J.; Michler, J.; Clegg, W. J. Deformation of lamellar y-TiAl below the general yield stress. Presented at the Indentation 2018, Liège, Belgium, September 11-14, 2018.
Edwards, T. E.; Di Gioacchino, F.; Mohanty, G.; Wehrs, J.; Michler, J.; Clegg, W. J. Longitudinal twinning in a TiAl alloy at high temperature by in situ microcompression. Acta Mater. 2018, 148, 202-215. https://doi.org/10.1016/j.actamat.2018.01.007
Fanicchia, F.; Maeder, X.; Ast, J.; Taylor, A. A.; Guo, Y.; Polyakov, M. N.; Michler, J.; Axinte, D. A. Residual stress and adhesion of thermal spray coatings: microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat. Mater. Des. 2018, 153, 36-46. https://doi.org/10.1016/j.matdes.2018.04.040
Gamcova, J.; Milkovič, O.; Németh, D.; Mohanty, G.; Michalik, Š.; Wehrs, J.; Bednarčík, J.; Krywka, C.; Breguet, J. M.; Michler, J.; et al. Comparison study of internal stress measured by diffraction mapping and calculation using FEM. Presented at the 13th international conference on local mechanical properties - LMP2017, Košice, November 6 - 8, 2017; Lofaj, F., Zubko, P., Eds.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 784, pp 120-123. https://doi.org/10.4028/www.scientific.net/KEM.784.120
Guillonneau, G.; Mieszala, M.; Wehrs, J.; Schwiedrzik, J.; Grop, S.; Frey, D.; Philippe, L.; Breguet, J. M.; Michler, J.; Wheeler, J. M. Nanomechanical testing at high strain rates: new instrumentation for nanoindentation and microcompression. Mater. Des. 2018, 148, 39-48. https://doi.org/10.1016/j.matdes.2018.03.050
Haverkamp, C.; Sarau, G.; Polyakov, M. N.; Utke, I.; Puydinger dos Santos, M. V.; Christiansen, S.; Höflich, K. A novel copper precursor for electron beam induced deposition. Beilstein J. Nanotechnol. 2018, 9 (1), 1220-1227. https://doi.org/10.3762/bjnano.9.113
Höflich, K.; Jurczyk, J. M.; Madajska, K.; Götz, M.; Berger, L.; Guerra-Nuñez, C.; Haverkamp, C.; Szymanska, I.; Utke, I. Towards the third dimension in direct electron beam writing of silver. Beilstein J. Nanotechnol. 2018, 9, 842-849. https://doi.org/10.3762/bjnano.9.78
Jurczyk, J.; Brewer, C.; Hawkins, O.; Polyakov, M.; Kapusta, C.; McElwee-White, L.; Utke, I. Purification of Ru structures created by focused electron beam induced deposition. Presented at the 1st ELENA conference, Warsaw, Poland, September 29 - October 2, 2018.
Lauener, C. M.; Petho, L.; Chen, M.; Xiao, Y.; Michler, J.; Wheeler, J. M. Fracture of silicon: influence of rate, positioning accuracy, FIB machining, and elevated temperatures on toughness measured by pillar indentation splitting. Mater. Des. 2018, 142, 340-349. https://doi.org/10.1016/j.matdes.2018.01.015
Li, H.; Papadakis, R.; Jafri, S. H. M.; Thersleff, T.; Michler, J.; Ottosson, H.; Leifer, K. Superior adhesion of graphene nanoscrolls. Commun. Phys. 2018, 1, 44 (7 pp.). https://doi.org/10.1038/s42005-018-0043-2
Liao, Z.; Axinte, D.; Mieszala, M.; M'Saoubi, R.; Abelhafeez, A.; Michler, J.; Hardy, M. On the influence of gamma prime upon machining of advanced nickel based superalloy. CIRP Ann. Manuf. Tech. 2018, 67 (1), 109-112. https://doi.org/10.1016/j.cirp.2018.03.021
Lignos, I.; Protesescu, L.; Emiroglu, D. B.; MacEiczyk, R.; Schneider, S.; Kovalenko, M. V.; DeMello, A. J. Unveiling the shape evolution and halide-ion-segregation in blue-emitting formamidinium lead halide perovskite nanocrystals using an automated microfluidic platform. Nano Lett. 2018, 18 (2), 1246-1252. https://doi.org/10.1021/acs.nanolett.7b04838
Manzano, C. V.; Ramos, D.; Pethö, L.; Bürki, G.; Michler, J.; Philippe, L. Controlling the color and effective refractive index of metal-anodic aluminum oxide (AAO)-Al nanostructures: morphology of AAO. J. Phys. Chem. C 2018, 122 (1), 957-963. https://doi.org/10.1021/acs.jpcc.7b11131
Manzano, C. V.; Abad, B.; Martín-González, M. The effect of electrolyte impurities on the thermoelectric properties of electrodeposited Bi2Te3 films. J. Electrochem. Soc. 2018, 165 (14), D768-D773. https://doi.org/10.1149/2.1131814jes
Mendis, B. G.; Taylor, A. A.; Guennou, M.; Berg, D. M.; Arasimowicz, M.; Ahmed, S.; Deligianni, H.; Dale, P. J. Nanometre-scale optical property fluctuations in Cu2ZnSnS4 revealed by low temperature cathodoluminescence. Sol. Energy Mater. Sol. Cells 2018, 174, 65-76. https://doi.org/10.1016/j.solmat.2017.08.028
Montinaro, E.; Grisi, M.; Letizia, M. C.; Pethö, L.; Gijs, M. A. M.; Guidetti, R.; Michler, J.; Brugger, J.; Boero, G. 3D printed microchannels for sub-nL NMR spectroscopy. PLoS One 2018, 13 (5), e0192780 (17 pp.). https://doi.org/10.1371/journal.pone.0192780
Petho, L.; Chen, M.; Lauener, C. M.; Michler, J.; Wheeler, J. M. In-situ mechanical testing of microfabricated micro/nanopillars. Presented at the 19th CMi annual review meeting, Lausanne, Switzerland, May 8, 2018.
Pethö, L.; Schoeppner, R.; Taylor, A.; Schwiedrzik, J.; Mohanty, G.; Chawla, V.; Thomas, K.; Könnyü, B.; Ipach, R.; Zechner, J.; et al. Combinatorial deposition techniques enabling fundamental nanomechanic investigations. Presented at the Swiss nano convention, Basel, June 30 - July 1, 2018. http://swissnanoconvention.ch/2016/posters/show1abstract.php?p=124
Pethö, L.; Casari, D.; Schürch, P.; Michler, J.; Zysset, P.; Schwiedrzik, J. In situ microtensile testing using custom fabricated silicon grippers. Presented at the 19th CMi annual review meeting, Lausanne, May 8, 2018.
Pethö, L.; Polyakov, M.; Schoeppner, R.; Thomas, K.; Könnyü, B.; Maeder, X.; Michler, J. Increasing the thermal stability of thin films by incorporating co-sputtered nanoparticles. Presented at the 16th international conference on plasma surface engineering, Garmisch-Partenkirchen, Germany, September 17-21, 2018.
Pethö, L.; Antonin, O.; Schoeppner, R.; Gabureac, M.; Rats, D.; Nelis, T.; Michler, J. Low temperature nano-crystalline diamond growth on high aspect ratio silicon structures. Presented at the 19th CMi annual review meeting, Lausanne, May 8, 2018.
Pethö, L.; Schürch, P.; Mieszala, M.; Schwiedrzik, J.; Wheeler, J.; Philippe, L.; Michler, J. Towards lightweight materials: Micromechanical test specimen preparation by 2D and 3D microfabrication techniques. Presented at the SWII - additive manufacturing & lightweight technologies 2018, Dübendorf, September 25, 2018.
Priebe, A.; Avancini, E.; Sastre Pellicer, J.; Bücheler, S.; Michler, J. Application of FIB-TOF-SIMS technique for elemental characterization of new thin film energy devices. Presented at the 2nd EuFN workshop 2018, Grenoble, France, June 19-20, 2018.
Puydinger dos Santos, M. V.; Szkudlarek, A.; Rydosz, A.; Guerra-Nuñez, C.; Béron, F.; Pirota, K. R.; Moshkalev, S.; Diniz, J. A.; Utke, I. Comparative study of post-growth annealing of Cu(hfac)2, Co2(CO)8 and Me2Au(acac) metal precursors deposited by FEBID. Beilstein J. Nanotechnol. 2018, 9, 91-101. https://doi.org/10.3762/bjnano.9.11
Puydinger dos Santos, M. V.; Barth, S.; Béron, F.; Pirota, K. R.; Pinto, A. L.; Sinnecker, J. P.; Moshkalev, S.; Diniz, J. A.; Utke, I. Magnetoelectrical transport improvements of postgrowth annealed iron–cobalt nanocomposites: a possible route for future room-temperature spintronics. ACS Appl. Nano Mater. 2018, 1 (7), 3364-3374. https://doi.org/10.1021/acsanm.8b00581
Ramachandramoorthy, R.; Schwiedrzik, J.; Petho, L.; Frey, D.; Bregeut, J. M.; Michler, J. Anomalous plasticity in amorphous silica micropillars tested at high strain rates. Presented at the Gordon research conference on thin film and small scale mechanical behavior, Lewiston, USA, July 15-20, 2018.
Ruoho, M.; Tarasiuk, N.; Rohbeck, N.; Kapusta, C.; Michler, J.; Utke, I. Stability of mechanical properties of molecular layer-deposited alucone. Mater. Today Chem. 2018, 10, 187-194. https://doi.org/10.1016/j.mtchem.2018.09.004
Schoeppner, R. L.; Taylor, A. A.; Cordill, M. J.; Zbib, H. M.; Michler, J.; Bahr, D. F. Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films. Mater. Sci. Eng. A 2018, 712, 485-492. https://doi.org/10.1016/j.msea.2017.11.062
Schwiedrzik, J. J.; Ast, J.; Pethö, L.; Maeder, X.; Michler, J. A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension. Fatigue Fract. Eng. Mater. Struct. 2018, 41 (5), 991-1001. https://doi.org/10.1111/ffe.12741
Schwiedrzik, J.; Casari, D.; Pethö, L.; Taylor, A.; Wolfram, U.; Zysset, P. K.; Michler, J. Anisotropic micromechanical properties and deformation mechanisms of bone extracellular matrix in tension and compression. Presented at the Gordon research conference on thin film and small scale mechanical behavior, Lewiston, USA, July 15-20, 2018.
Schürch, P.; Pethö, L.; Schwiedrzik, J.; Michler, J.; Philippe, L. Additive manufacturing through galvanoforming of 3D nickel microarchitectures: simulation-assisted synthesis. Adv. Mater. Technol. 2018, 3 (12), 1800274 (8 pp.). https://doi.org/10.1002/admt.201800274
Schürch, P.; Pethö, L.; Schwiedrzik, J.; Michler, J.; Philippe, L. Electrodeposition of 3D nickel microcomponents: simulation assisted synthesis. Presented at the COMSOL conference 2018, Lausanne, Switzerland, October 22-24, 2018.
Thiebaud, L.; Legeai, S.; Ghanbaja, J.; Stein, N. Synthesis of Te-Bi core-shell nanowires by two-step electrodeposition in ionic liquids. Electrochem. Commun. 2018, 86, 30-33. https://doi.org/10.1016/j.elecom.2017.11.010
Tumbajoy-Spinel, D.; Maeder, X.; Guillonneau, G.; Sao-Joao, S.; Descartes, S.; Bergheau, J. M.; Langlade, C.; Michler, J.; Kermouche, G. Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron. Mater. Des. 2018, 147, 56-64. https://doi.org/10.1016/j.matdes.2018.03.014
Waheed, S.; Hao, R.; Zheng, Z.; Wheeler, J. M.; Michler, J.; Balint, D. S.; Giuliani, F. Temperature-dependent plastic hysteresis in highly confined polycrystalline Nb films. Model. Simul. Mater. Sci. Eng. 2018, 26 (2), 025005 (18 pp.). https://doi.org/10.1088/1361-651X/aa9ba2