Publications 2018
Affolter, C.; Barbezat, M.; Piskoty, G.; Neuner, O.; Terrasi, G. Failure of a sag water pipe triggered by aging of the GFRP composite relining. Eng. Fail. Anal. 2018, 84, 358-370. https://doi.org/10.1016/j.engfailanal.2017.09.017
Alderliesten, R. C.; Brunner, A. J.; Pascoe, J. A. Cyclic fatigue fracture of composites: what has testing revealed about the physics of the processes so far? Eng. Fract. Mech. 2018, 203, 186-196. https://doi.org/10.1016/j.engfracmech.2018.06.023
Baschnagel, F.; Terrasi, G. P.; Triantafyllidis, Z.; Meier, U. Fatigue and durability of laminated carbon fibre reinforced polymer straps for bridge suspenders. In Proceedings of the ninth international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), presented at the 9th international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), Paris, France, July 17-19, 2018; 2018; p (8 pp.).
Baschnagel, F.; Härdi, R.; Triantafyllidis, Z.; Meier, U.; Terrasi, G. P. Fatigue and durability of laminated carbon fibre reinforced polymer straps for bridge suspenders. Polymers 2018, 10 (2), 169 (14 pp.). https://doi.org/10.3390/polym10020169
Brunner, A. J.; Clerc, G.; Niemz, P. Acoustic emission monitoring of adhesively bonded wood joints under quasistatic and cyclic fatigue mode II flexure loads using end-notch-flexure specimens. In Conference proceedings Ewgae 2018, presented at the 33rd European conference on acoustic emission testing (EWGAE), Senlis, France, September 12-14, 2018; CETIM: Senlis, 2018; p (10 pp.).
Brunner, A. J. Identification of damage mechanisms in fiber-reinforced polymer-matrix composites with acoustic emission and the challenge of assessing structural integrity and service-life. Constr. Build. Mater. 2018, 173, 629-637. https://doi.org/10.1016/j.conbuildmat.2018.04.084
Brunner, A. J. Scatter, scope and structures: what fatigue fracture testing of fiber polymer composites is all about. In 39th Risø international symposium proceedings, presented at the 39th Risø international symposium on materials science 'fatigue of composite materials: microstructure, mechanics and methods', Roskilde, Denmark, September 3-6, 2018; Fæster, S., Goutianos, S., Lilholt, H., Madsen, B., Mikkelsen, L. P., Sørensen, B. F., Toftegaard, H. L., Eds.; IOP conference series: materials science and engineering; IOP, 2018; Vol. 388, p 012003 (18 pp.). https://doi.org/10.1088/1757-899X/388/1/012003
Burda, I.; Baechler, C.; Gardin, S.; Verma, A.; Terrasi, G. P.; Kovacs, G. Low-cost scalable printing of carbon nanotube electrodes on elastomeric substrates: towards the industrial production of EAP transducers. Sens. Actuators A 2018, 279, 712-724. https://doi.org/10.1016/j.sna.2018.07.021
Byrne, R. M.; Zhou, Y.; Zheng, L.; Chowdhury, S. K.; Aiyangar, A.; Zhang, X. Segmental variations in facet joint translations during in vivo lumbar extension. J. Biomech. 2018, 70, 88-95. https://doi.org/10.1016/j.jbiomech.2017.09.026
Chakraborty, S.; Chakraborty, A. K.; Barbezat, M.; Terrasi, G. P. Interfacial interaction and the fracture toughness (KIC) trends in epoxy nanocomposites filled with functionalized graphene‐based fillers. Polym. Compos. 2018, 39 (S4), E2356-E2369. https://doi.org/10.1002/pc.24675
Chakraborty, S.; Barbezat, M.; Reyes, E. C.; Chakraborty, A. K.; Terrasi, G. P. Investigation of the interfacial interactions in epoxy nano-composites filled with functionalized graphene based fillers. Compos. Interfaces 2018, 26 (2), 157-182. https://doi.org/10.1080/09276440.2018.1488488
Comensoli, L.; Maillard, J.; Kooli, W. M.; Junier, P.; Joseph, E. Soluble and solid iron reduction assays with Desulfitobacterium hafniense. Bio-protocol 2018, 8 (17), 1-19. https://doi.org/10.21769/BioProtoc.3002
Dombrowski, M. E.; Rynearson, B.; LeVasseur, C.; Adgate, Z.; Donaldson, W. F.; Lee, J. Y.; Aiyangar, A.; Anderst, W. J. ISSLS Prize in bioengineering science 2018: dynamic imaging of degenerative spondylolisthesis reveals mid-range dynamic lumbar instability not evident on static clinical radiographs. Eur. Spine J. 2018, 27 (4), 752-762. https://doi.org/10.1007/s00586-018-5489-0
Hosseini, A.; Barbezat, M.; Michels, J.; Ghafoori, E.; Motavalli, M.; Terrasi, G. Glass transition evaluation of commercially available epoxy adhesives for strengthening of steel structures with bonded CFRP plates. In Proceedings of the ninth international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), presented at the 9th international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), Paris, France, July 17-19, 2018; 2018; pp 267-274.
Hosseini, A.; Ghafoori, E.; Motavalli, M.; Nussbaumer, A.; Zhao, X. L.; Koller, R. Prestressed unbonded reinforcement system with multiple CFRP plates for fatigue strengthening of steel members. Polymers 2018, 10 (3), 264 (13 pp.). https://doi.org/10.3390/polym10030264
Jones, R.; Kinloch, A. J.; Michopoulos, J. G.; Brunner, A. J.; Phan, N. Delamination growth in polymer-matrix fibre composites and the use of fracture-mechanics data for material characterization and life prediction. In Aircraft sustainment and repair; Jones, R., Baker, A., Matthews, N., Champagne, V., Eds.; Elsevier, 2018; pp 763-797. https://doi.org/10.1016/B978-0-08-100540-8.00013-3
Kooli, W. M.; Comensoli, L.; Maillard, J.; Albini, M.; Gelb, A.; Junier, P.; Joseph, E. Bacterial iron reduction and biogenic mineral formation for the stabilisation of corroded iron objects. Sci. Rep. 2018, 8 (1), 764 (11 pp.). https://doi.org/10.1038/s41598-017-19020-3
Ploeg, H. L.; Au, A. G.; Aiyangar, A. K.; Yamdagni, N.; Biegler, K. K.; Squire, M. W.; Illgen II, R. L. Preclinical analysis to assess aseptic loosening of orthopaedic implants. In Computer methods in biomechanics and biomedical engineering. Proceedings of the 14th International Symposium CMBBE, Tel Aviv, Israel, 2016, presented at the 14th international symposium CMBBE, Tel Aviv, Israel, September 20–22, 2016; Gefen, A., Weihs, D., Eds.; Lecture notes in bioengineering; Springer: Cham, Switzerland, 2018; pp 129-143. https://doi.org/10.1007/978-3-319-59764-5_15
Pérez-Galmés, M.; Renart, J.; Sarrado, C.; Brunner, A. J.; Rodríguez-Bellido, A. Towards a consensus on mode II adhesive fracture testing: experimental study. Theor. Appl. Fract. Mech. 2018, 98, 210-219. https://doi.org/10.1016/j.tafmec.2018.09.014
Salimian, S.; Zadhoush, A.; Talebi, Z.; Fischer, B.; Winiger, P.; Winnefeld, F.; Zhao, S.; Barbezat, M.; Koebel, M. M.; Malfait, W. J. Silica aerogel–epoxy nanocomposites: understanding epoxy reinforcement in terms of aerogel surface chemistry and epoxy–silica interface compatibility. ACS Appl. Nano Mater. 2018, 1 (8), 4179-4189. https://doi.org/10.1021/acsanm.8b00941
Senteler, M.; Aiyangar, A.; Weisse, B.; Farshad, M.; Snedeker, J. G. Sensitivity of intervertebral joint forces to center of rotation location and trends along its migration path. J. Biomech. 2018, 70, 140-148. https://doi.org/10.1016/j.jbiomech.2017.10.027
Toumpanaki, E.; Lees, J. M.; Terrasi, G. P. Bond durability of carbon fiber–reinforced polymer tendons embedded in high-strength concrete. J. Compos. Constr. 2018, 22 (5), 04018032 (17 pp.). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000870
Toumpanaki, E.; Lees, J. M.; Barbezat, M.; Terrasi, G. P. Effect of internal moisture content on the TG values of CFRP rods. In 9th international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), PARIS 17-19 JULY 2018, presented at the 9th international conference on fibre-reinforced polymer (FRP) composites in civil engineering (CICE 2018), Paris, France, July 17-19, 2018; Ferrier, E., Benzarti, K., Caron, J. F., Eds.; International Institute for FRP in construction (IIFC): sine loco, 2018; Vol. 1, pp 112-118.
Wyrzykowski, M.; Terrasi, G.; Lura, P. Expansive high-performance concrete for chemical-prestress applications. Cem. Concr. Res. 2018, 107, 275-283. https://doi.org/10.1016/j.cemconres.2018.02.018