Empa results published in “Nature Materials”

How to produce flexible CIGS solar cells with record efficiency

Sep 21, 2011 | MICHAEL HAGMANN

The technology yielding flexible solar cells with an 18.7% world record efficiency developed by scientists at Empa, the Swiss Federal Laboratories for Materials Science and Technology, has now been published in “Nature Materials”. Key to the breakthrough is the control of the energy band gap grading in the copper indium gallium (di)selenide semiconductor, also known as CIGS, the layer that absorbs light and converts it into electricity.

a592-2011-05-19-b1m_gigs.jpg
 

Flexible CIGS solar cells developed at Empa.
 

High-performance flexible and lightweight solar cells, say, on plastic foils, have excellent potential to lower the manufacturing costs through roll-to-roll processing and the so called “balance-of-system” cost, thus enabling affordable solar electricity in the near future. Thus far, however, flexible solar cells on polymer films have been lacking behind in performance compared to rigid cells, primarily because polymer films require much lower temperatures during deposition of the absorber layer, generally resulting in much lower efficiencies.
 

Record-breaking team
The research team at Empa's Laboratory for Thin Film and Photovoltaics, led by Ayodhya N. Tiwari, has been involved in the development of high-efficiency CIGS solar cells on both glass and flexible substrates with a special focus on reducing the deposition temperature of the CIGS layer. The group has repeatedly increased efficiency of flexible CIGS solar cells over the past years – first at ETH Zurich and now since three years at Empa. With their current record value of 18.7% Tiwari and his team nearly closed the efficiency gap to cells based on multi-crystalline silicon (Si) wafers or CIGS cells on glass. The scientific details of their novel low-temperature deposition technology and the multi-layered device have recently been published in “Nature Materials”.
 
 
Size: 42 KB
 

Improvement in energy conversion efficiency of flexible CIGS solar cells on polymer film lead to the world record efficiency of 18.7% for flexible CIGS solar cells developed at Empa.
 
 
“To achieve such high efficiency values, we had to reduce the recombination losses of photo-generated charge carriers”, said Tiwari. CIGS layers grown by co-evaporation at temperature of around 450 °C have a strong composition grading because of inadequate inter-diffusion of intermediate phases and preferential diffusion of gallium (Ga) towards the electrical back contact
To overcome this problem doctoral students Adrian Chirilã and Patrick Bloesch developed novel processes for optimizing the solar cell performance. To achieve an appropriate composition profile in the CIGS layer –  for enabling more efficient charge carrier collection and reduced interface recombination – Chirilã and colleagues developed an innovative growth process by carefully controlling the Ga and indium (In) evaporation flux during different stages of the evaporation process.
 

High-efficiency solar cells – grown on cheap metal-foils
Such high-efficiency CIGS solar cells up to now were developed only on glass substrates with processes where CIGS layers are grown at temperatures of 600 °C or above. In contrast, polymer foils cannot withstand such high temperatures. The low-temperature process now developed by Tiwari and Co. not only yielded an 18.7%-efficiency cell on polymer foils but also another record efficiency of 17.7% on steel foil without any diffusion oxide or nitride barrier layer commonly used in high-temperature processes. Both efficiencies were independently certified by the Fraunhofer Institute for Solar Energy Systems (ISE) in Freiburg, Germany. “We have thus shown that this low-temperature process is also applicable on low-cost metal foils such as aluminum or Mild-steel, achieving comparably high-efficiency cells and indicating a severe cost reduction potential with this technology”, said Tiwari.
 
"The profound understanding of the materials properties in the complex quaternary system and its various interfaces in the solar cell enabled the development of a low temperature deposition process on an flexible plastic substrate and hence this scientific achievement.”, says Empa Director Gian-Luca Bona. "Next, we need to transfer these innovations to industry for large scale production of low-cost solar modules to take off." The research has been supported by the Swiss National Science Foundation (SNSF), the Commission for Technology and Innovation (CTI), the Swiss Federal Office of Energy (SFOE), EU Framework Programmes as well as by Swiss companies W. Blösch AG and FLISOM.
 
 
 

Further Information

Editor / Media contact